Copper Heat Tube Heat Sinks
Working Principle of Copper Heat Tube Heat Sinks
The working principle of copper heat tube heat sinks is based on the principle of heat transfer. Its interior is a heat tube made of copper, filled with a special working medium, usually a liquid, such as ethylene glycol, water, commonly used in copper heat tubes. When electronic equipment is working, the heat generated by it will be transferred to the heat tube, the working fluid will become gaseous, and then flow along the inner wall surface of the heat pipe through the pressure difference or gravity effect inside the heat tube, flowing towards the cold end of the heat tube. At the cold end of the heat tube, the working medium cools down, turns into a liquid again, and returns to the hot end of the heat pipe to complete a cycle.
During this process, heat is absorbed and released through ethylene glycol or water.The working medium absorbs heat from the heat source, and during the process of flowing from the heat tube to the cold end, the heat is transferred to the surface of the heat sink through radiation, conduction, and convection within the heat tube, and then dissipates to the surrounding environment through the heat dissipation method on the surface of the copper heat tube heat sinks, thereby effectively controlling the temperature of the equipment and avoiding overheating damage to the equipment
Main Components of Copper Heat Tube Heat Sinks
The main components of the copper heat tube heat sink include:
1 .Copper heat tubes: Copper heat tubes are a key component of the copper heat tube heat sink, responsible for conducting heat from electronic equipment to the surface of the heat sink.
2. Heat sink fins: The heat sink fins play a cooling role by increasing the surface area and promoting heat dissipation.
3. Base: The base is a part that connects the heat sink and the heat source, serving as a support and fixation.
In addition to the above main components, the copper heat tube heat sinks also have other auxiliary components, such as silicone grease, screws, and so on. In general, the main components of copper heat tube heat sink are copper heat tubes, heat sink fins, and base. When used, these components cooperate with each other to effectively transfer heat from electronic devices to the external environment, improving the stability and service life of the device.
Superior Performance of Copper Heat Tube Heat Sinks
The superior heat dissipation performance of copper heat tube heat sinks is mainly reflected in the following aspects:
1. High thermal conductivity: Copper heat tubes are made of pure copper materials with high thermal conductivity, which can quickly transfer heat to the surface of the heat sink, thereby effectively improving heat dissipation efficiency.
2. Large surface area: Increasing the surface area of the heat sink can further accelerate the dissipation and conduction of heat, and improve the heat dissipation effect.
3. High efficiency: The copper heat tube heat sinks have high heat dissipation efficiency, which can quickly reduce the temperature of electronic equipment, thereby protecting the stability and lifespan of the equipment.
4. Mute: Due to the efficient heat dissipation performance of the copper heat tube heat sinks, it can greatly reduce the working temperature of electronic devices, allowing the electric fan to operate at low speeds and reducing noise pollution.
5. Corrosion resistance: The copper heat tube heat sinks are made of pure copper, which has high corrosion resistance and will not reduce the heat dissipation effect due to moisture and chemical corrosion.
In summary, copper heat tube heat sinks have superior heat dissipation performance, which can greatly improve the stability and lifespan of electronic equipment.
Get Fast Sample With 4 Simple Steps
Selection of Copper Heat Tube Heat Sinks
When selecting the copper heat tube heat sinks, the following points need to be considered:
1 . Application scenario: Different application scenarios may require different heat dissipation effects and shapes of heat sins. For example, some compact devices may require miniaturized heat sinks to accommodate space limitations.
2. Power and temperature of components: Components with higher power and temperature require heat sinks with good heat dissipation performance, so corresponding heat dissipation fins need to be selected to reduce temperature.
3. Size and shape of the heat sink: The size and shape of the heat sink will affect the heat transfer area and efficiency, and it needs to be matched with the target component.
4. Structure and material of heat sinks: The selection of material will affect the heat dissipation effect, and needs to be selected based on specific application scenarios.
5. Corrosion resistance of heat sinks: Heat sinks should have good corrosion resistance to avoid reducing the heat dissipation effect due to corrosion during use.
Overall, copper heat tube heat sinks have efficient heat dissipation performance, and when selecting them, it is necessary to comprehensively consider the above factors based on the specific situation to achieve the best heat dissipation effect.
Leading Manufacturer of Copper Heat Tube Heat Sinks
As a leading copper heat tube heat sinks manufacturer, our team has rich experience and professional knowledge, and has strong design, production and testing capabilities in heat dissipation, and can provide customized heat dissipation solutions to solve heat dissipation problems for customers. So, if you are looking for a high-quality, high-efficiency copper heat tube heat sinks manufacturer, our team will be more than willing to work with you to provide you with the best solution.
Choose Your Heat Pipe Heat Sink
Famos Tech Is Heat Dissipation Expert
Famos focus on heatsink ODM & OEM for over 15 years, our heat sink factory customizes and wholesale bulk extruded aluminum heat sinks, designed and produced more than 5000 different shape heatsinks. If you have any heat sink requirements, welcome to contact us.
